Slatpanel® Glow Disc Wall-Mounted Rechargeable Lighting

The Glow Wall-Mountable range is a collection of four rechargeable LED wall lights, designed to work with interior Slatpanel® acoustic panels. Each light has a distinct form: the Column is a smooth half-cylinder that casts light from both open ends; the Frame is a flat rectangle with recessed LEDs; the Disc is a flat circular face that sits almost flush against the panel; and the Orb is a frosted glass globe on a rigid gooseneck arm. All four are available in textured black or matte gold, share the same 2800K warm white output and three-stage touch dimming, and charge via USB-A to USB-C. No hardwiring. No trailing cables.

Three distinct products, each suited to a different way of lighting your panel wall.

Glow Strips are LED strips that sit directly in the slat channel between panels. They are almost invisible when off and produce a continuous line of light that runs with the grain. The most integrated option: the light feels like part of the panel rather than an add-on.

The Glow Beam is a rechargeable accent light that screws into the gap between slats via a magnetic ball-bearing base. It is designed for directional, spotlit warmth: highlighting artwork, a shelf, or a section of paneling. Sold individually, easily removed for charging.

The Glow Wall-Mountable range (Column, Frame, Disc, and Orb) mounts between the panel slats using the included brackets. These are the most prominent of the three options, functioning as considered light fittings in their own right and adding both light and material interest to the wall.

Accent lighting and atmosphere. The Glow Wall-Mountable range is designed to complement your panel wall rather than illuminate a room. Think of them as the layer of light that makes the space feel considered at the end of the day: the warm wash across the grain of the timber, the glow that changes how the room feels at 6 p.m. They are not a replacement for a ceiling light or a primary light source.

Textured black and matte gold, across all four designs. Both are powder-coated steel, built to hold the finish over time. The choice will depend on the panel, the room palette, and whether you want the light to recede into the wall or read as a deliberate material addition.

Yes. The Column, Frame, Disc, and Orb are all fully rechargeable and require no fixed wiring or mains connection. Each light lifts clear of its French Cleat bracket, charges via the included USB-A to USB-C cable, and hangs straight back on the wall once charged. No electrician, no trailing cables, no permanent commitment to a position on the wall.

Each light charges via the included USB-A to USB-C cable. The Li-Ion battery has a capacity of 2 x 2000mAh and a rated life of three years under normal use. Input voltage is 5V DC. To charge, remove the light from its bracket, connect the cable to a 5V power source, and recharge before reinstalling.

Technically, yes, if the cable reaches a nearby outlet and the light remains on the bracket. In practice, we recommend taking the light down to charge. It should always be switched off during charging to preserve the battery and extend its life over time. Once fully charged, rehang it and it is ready to use.

The Glow Wall-Mountable range is designed for use with the interior Slatpanel® acoustic panel range only. It is not compatible with Hydro, Ultraflex, Flutto®, or Plaank® panels.

Two brackets are included to cover different slat gap sizes. Use the narrower bracket for Slatpanel® Luxe panels (0.39 in. slat gap), and the wider bracket for all other compatible interior Slatpanel® acoustic panels (0.51 in. slat gap). If you are unsure which panel you have, contact our care team before ordering.

Two brackets are included in each box, but only one is used per installation. The bracket is a French Cleat design: fix it between the panel slats with the thinner edge facing upward, then hang the light onto it from above. Fitting the bracket the wrong way will prevent the light from sitting correctly on the wall.

Choose your bracket based on the slat gap of your panel: use the narrower bracket for the 0.39 in. gap found on Slatpanel® Luxe panels, and the wider bracket for the 0.51 in. gap on all other compatible interior Slatpanel® acoustic panels. No hardwiring is required.

Yes. The included brackets are designed for Slatpanel® acoustic panels, but the lights can be mounted to a plain wall using appropriate fasteners for the substrate. The aesthetic is best suited to a panel wall, but the product can be used on any flat interior surface.

All four lights feature three-stage touch dimming: 10%, 50%, and 100% brightness. A single touch to the light cycles through the three settings. No remote is required, though the mood each setting creates is distinct enough that it is worth spending time with all three before settling on a favorite.

All four lights output at 2800K, a warm white that sits at the intimate end of the spectrum. It is a considered choice for panel walls: warm enough to draw out the grain and texture of natural wood without casting the room in an amber that makes other colors read incorrectly. CRI ranges from 80 on the Orb to 82 on the Frame, meaning colors in the room read true under the light.

They can provide a warm, localized glow, but they are not designed or positioned as task lighting. The 2800K output and lumen range across the four designs (83 to 158 lumens) makes them well-suited to accent and ambient use. For reading, you will want a dedicated task light alongside them

No. All four lights carry an IP20 rating, meaning they are suitable for indoor dry use only. They should not be installed in bathrooms, near steam sources, or anywhere with significant moisture or humidity. The optimal operating temperature is 59 to 77 degrees Fahrenheit.

The lights are designed for ambient use and are safe to leave on, but we would not recommend leaving any rechargeable light unattended for extended periods. For overnight ambience, the 10% setting gives the warmest, most considered glow and makes the most of the battery. Switch off before sleeping to preserve the battery life over time.

No. The lights are not compatible with smart home systems, Wi-Fi, or app control. They operate independently via touch dimming only. For a considered lighting setup, that simplicity is part of the appeal: one touch, the right mood, nothing else to configure.

No. All four lights are controlled by a single touch on the unit itself, which cycles through 10%, 50%, and 100% brightness. There is no remote, and none is required.

It depends on the brightness setting. On the lowest setting (10%), used for three to four hours at a time, a single charge can last up to a month. The higher the brightness and the longer each session, the more frequently you will need to charge. For everyday ambient use at a lower setting, charging is an occasional task rather than a regular one.

The Li-Ion battery is rated for a 3-year lifespan under normal use. The lights also carry a three-year manufacturer’s warranty. If the battery degrades before the end of the warranty period, contact the team.

First, check the battery level by attempting to charge the light via the USB-A to USB-C cable. If the light does not respond after a full charge, check the bracket is correctly oriented (thinner edge facing upward) and the light is fully seated. If the issue persists, contact the team with your order number. If the light is within the three-year warranty period, we will arrange a resolution.

Contact the team directly if you need replacement parts. We can advise on availability and arrange what is needed.

Yes. We offer trade pricing for interior designers, architects, contractors, and trade professionals. Apply for a WVH® Pro trade account through our website or contact our trade team directly for project pricing and volume discounts.

We offer free shipping to the contiguous 48 states on most orders. Shipping to Alaska, Hawaii, and US territories may incur a surcharge calculated at checkout.

Our warehouse and display area in Tolleson, Arizona is open for visits by appointment. Contact us to arrange a time so we can have the right products and samples ready for you to see in person.

You can return unused products within 30 days of delivery. Items must be in their original, undamaged packaging. Refunds are processed once we receive and inspect the return. For full terms, including sample returns, visit our returns page or contact our customer service team.