Slatpanel® Glow Beam Compatible Panels

The Slatpanel® Glow Beam is cordless. No need to plug into an outlet. It's rechargable by USB-C and can be quickly removed from the magnetic base for easy charging.

Installation is quick and easy! The Slatpanel® Glow Beam is designed to fit between the slats of our Slatpanel® Acoustic, Luxe, and Elegance ranges. Simply screw the base into the gap between the slats, and attach the LED lighting unit to the magnetic ball bearing. Please see our installation video here for all details on setup.

You can! Once screwed in, the Slatpanel® Glow Beam base does not need to be moved, providing a fixed location for the light to attach too.'

The Slatpanel® Glow Beam base is designed to fit between the slats of most of our panels, but can be installed on the slat itself. We recommend using longer screws than what we provide, to ensure the screw goes through the slat and the wall for the most secure fit.'

Slatpanel® Glow Beam is designed to fit the original Slatpanel® Acoustic Slat Wood and the Acoustic Slat Color. It will also fit in our Slatpanel Luxe and Elegance panel ranges! View all Beam-compatible panels here.

The brightest setting on this light is 320 lumens, and a desk lamp is typically 500-800 lumens to be considered a comfortable reading light. However, it can be quickly removed from the base to use as a handheld light source as desired.

Slatpanel® Glow Beam has three light settings. Simply tap the back of the LED unit to toggle between the low, medium, and high brightness settings.

While the Beam may not be suitable as the primary light source for larger spaces, it's ideal for accent lighting, or creating a cozy ambiance in smaller areas.

The Slatpanel® Glow Beam light measures 2.95" in diameter.

There is one Slatpanel® Glow Beam per box.

The Slatpanel® Glow Beam is only available in one size.

Slatpanel® Glow Beam has three temperature settings: Warm (2700K), Natural (4000K), and Cool (5700K). To change the color temperature of the light, long press the power button for two second to start cycling through the Cool, Natural and Warm light settings.

Yes! The Beam is designed to fit between the panels slats, but it can also be installed onto a wall with the provided screws.

The Slatpanel® Glow Beam is designed for interior use only.

The Slatpanel® Beam light is not compatible with a remote.

The Slatpanel® Beam is not Wi-Fi compatible and cannot be controlled with a smart device or home system.

Simply remove the LED head from the magnetic ball bearing, and use the provided USB to USB-C cable to charge the unit. When charging, a small red light appears next to the charging port, and once fully charges, this turns green.

The Slatpanel® Glow Beam takes approximately 4-5 hours to charge fully.

Because the USB-C charging port is next to the magnetic mounting point, the light needs to be removed from the base to charge. The light can be on while charging, as long as it has enough power.

Do not use a charger with more than 5V. A phone charger is recommended. A charger for a laptop or tablet contains more voltage than needed.

A single charge can last up to 20 hours. The time varies depending on the brightness of the light, and the color tone selected. Run time times are approximate: 20 hours on low, 8 hours on medium, and 5 hours on high.

You can! To access the Memory function and retain your preferred lighting settings, turn the light on for 30 seconds, and then immediately switch it off. Power it back on, and your preferred settings will have saved.

The Slatpanel® Glow Beam can be installed in a kitchen or bathroom, but must be installed away from water, heavy steam, and extreme heat sources.

We do! All delivery charges are calculated at checkout.

You can return unused lights within 30 days of delivery. For our full delivery and return policy, please click here.

There is a three year warranty on this product.